This is a bespoke 24 week plan for IronMan Australia Port Macquarie 2020, designed by an IronMan Certified Coach who has completed multiple IronMan Races.
The plan take into consideration the unique nature of the African Championship race, with bespoke workouts tailored for the swim, bike and run, including consideration for the course profile, the elevation and the weather.
It has consideration for build races, such as an IronMan 70.3.
It is 24 weeks starting from Monday 18th November, and finishes on race day with consideration for Christmas and New Year periods.
The plan follows a typical pattern of 2 build weeks followed by a recovery week.
There is a 3 week taper. period.
It has been designed by an IRONMAN Certified Coach, TrainingPeaks Level 1 Certified Coach who has completed multiple IronMan Races.
This plan is perfect for first time IronMan athletes, stepping up from Olympic or 70.3 triathlons due to the extended Preparation Phase, or more experienced athletes as there there are optional workouts to increase or decrease the volume of training.
The bike has power workouts, but also an option for HR based training. Swim is based on Pace and Runs are based on HR.
This is done on an indoor trainer using a powermeter. If you are using Heart Rate (HR) then still do this test, and use average HR data.
Warm up 20 minutes at easy to endurance pace.
3 x 1 minutes with 1 minute recovery with high cadence around 100rpm.
5 minute easy riding
Main set start with a 5 minute all out effort.
10 minutes easy riding
20 minutes time trial - this is the section you will use to determine your FTP
If using HR rather than power meter then do 25 minutes
Cool down 10 minutes to 15 minutes easy cycling.
Once you have downloaded your data you need to determine your average power for the 20 minute interval. Take your average power and multiple by 0.95 to calculate your FTP. So if your average power is 305watts x 0.95 = 290w is your Functional Threshold Power.
If using Heart Rate then take your average heart rate from the final 20 minutes of the 25 minute interval. Multiple this number by 0.95 to calculate your Lactate Threshold.
This training plan is based on 6 Training Zones for Power and 7 Training Zones for Heart Rate which can be found in Training Peaks.
Heart Rate training zones are based on Lactate Threshold - Joel Friel for Cycling.
Power is based on Threshold Power - Andy Coggan (6).
Use your FTP and/or Lactate Threshold HR and put in the Zones within Setting in Training Peaks to calculate your relevant Zones which will be used for future work outs.
20 min Very Easy Run
This swim is designed to determine your Threshold Swim Pace (T-Pace). This will be used in a number of swims sessions.
Warm up: 200m building speed each 50m (slow-medium-faster-fastest).
Rest 30 sec.
Then 5 x 400m (10 sec recoveries) building speed on each 100m (slow-medium-faster-fastest).
Recover 10 seconds after last one.
Then swim a 500m time trial. All out.
Your average 100 pace for this is your T-Pace for future workouts.
Then swim easy, 100m cool down.
This test is designed to determine your Lactate Threshold Heart Rate and Pace.
Warm Up for 15 minutes.
In this WU include some bum flicks, high knees, walking lunges and 4 x 20 second accelerations (try to run each acceleration faster than the previous - not a flat out sprint, but getting Heart Rate up, 40 seconds recovery between reps).
Want to be very warmed up ahead of Main Set
Run a 30 minute time trial on flat course/track. Punch HR monitor 'lap' button 10 minutes into Time Trial. Average heart rate for last 20 minutes predicts Lactate threshold heart rate (LTHR).
Easy run to make time up to 1 hour. Walk last few minutes.
1hr Ride in Zones 1 - 2 (easy pace)
The IronMan Australia Course has around 9m of climbing for every km (so around 1,600m over the 180km).
Therefore, try to ensure you are achieving this in your long rides.
If a 2.5hr ride covers 50km aim to gain 450m of climbing (50km x 9m = 450m of climbing).
This will get you used to climbing this ascent.
40 Minutes Easy Run in HR Zones 1 - 2
The IronMan Australia Run Course is a loop with a total elevation gain of just over 500m. Try to ensure on your long runs you achieve 13m to 15m of ascent per km during your endurance runs.
If you cover 10km in a 1hr run, try to ensure you climb 130m - 150m as a minimum. Although not a lot of climbing it is good to get used to the rolling nature of the climbs.
HR Zone should be in Zone 1 - 2 for majority of this run (it may go in to Zone 3 - 4 for uphills by try to keep in Zones 1 and 2).
Swim designed to work on your technique and swimming efficiently.
Swim Smooth http://www.swimsmooth.com/drills
Have details on a lot of the drills mentioned. It also has a Swim Type which may be of value and allow you to tailor the drills listed to benefit you more.
The swimming element of this programme is designed to be progressive, with the initial period focussing on technique in the pool and being efficient, moving more on to speed and speed endurance and the final phase focussing on drills to help open water swimming and bespoke elements linked to the Xtri swim.
Distances are fine in either yards or meters.
Warm Up (WU):
4 x 100 as:
100 - swim with closed fists
100 - freestyle
Main Set (MS):
2 x 50 kick on side
50 Broken Arrow, 30 seconds rest
3 x 100 at T-Pace on 10 seconds rest
This is the pace you calculated last week + 10 seconds per 100m, of 2.5 seconds slower per 25m.
200 as Single Arm:
2 x (25 L Arm, 2 R Arm, 50 freestyle) 30 seconds rest
3 x 100 at T-Pace on 10 seconds rest
Cool Down (CD):
300 with Pull Buoy