Power Sweet Spot Base - Mid Vol. I

Average Weekly Training Hours 06:32
Training Load By Week
Average Weekly Training Hours 06:32
Training Load By Week

N.B. If you are a returning costumer, please email us for 15% discount, stating your name and email and which other Output Cycling plan you have in your library. We will send you the coupon-code. --- Sweet Spot Base plans are foundation training plans that can serve as the basis for all training to follow. Sweet Spot Base serves as annual opportunity to revisit the form work that often gets neglected as the cycling season progresses and then it helps establish the aerobic fitness foundation upon which you'll build your season's top fitness, all in as few as 4 hours each week depending on your weekly training availability. Following the initial fitness assessment (where your extract the FTP as 0.9 of your best 8 minutes effort) the Sweet Spot Base emphasizes pedal economy - via leg speed, speed endurance & varied cadence - as well as base aerobic fitness via a healthy dose of Sweet Spot training aimed at making every minute of your indoor endeavors count.

Sample Day 2
1:00:00
58.7TSS
Output Cycling: 8 Minute Test

Following a total of 28 minutes of warm-up, a couple of 8-minute time trials are used to assess Functional Threshold Power (FTP) & Lactate Threshold Heart Rate (LTHR). The recovery interval between assessment efforts is 10 minutes.


Use any cadence that suits you, but if you're pedaling slower than 80rpm it's in your best interest to increase your cadence over the course of your training.


This workout can also serve as a workout in its own right and will target muscular endurance and optimal aerobic power output during the two 8-minute time trials.


This workout could also be used to improve short-duration pacing strategies for short time trials or prologues, perhaps even downhill MTB races.

Sample Day 3
0:30:00
19.6TSS
Output Cycling: Endurance 1 x 30 min

This workout is a short, aerobic Endurance workout consisting of 30 minutes spent between 60-70% FTP.
--
The workout can serve as a light workout on its own, it can be paired with a short, intense interval session, beforehand or afterward, or it can be used to get you on the bike between hard workouts in order to spin out some heaviness.
---
Goals:
Flush your legs or add some additional aerobic base work in a short, non-exhausting period of time.

Try to keep your spin quick and light, preferably above 85rpm.
---
---
TrainerRoad - Taku

Sample Day 4
1:00:00
54.3TSS
Output Cycling: Sweet Spot 3 x 12(3) min

This workout is 3x12-minute intervals at 85% FTP with 3-minute recoveries between intervals.
---
The primary aim is to improve your ability to resist fatigue at reasonably high power output over substantial lengths of time.

In other words, this workout is all about increasing your muscular endurance.

In doing so, you can improve your ability to climb faster & longer, face stiff winds without fading and time trial more consistently over the entire course of the event.

Additionally, you have the option of targeting specific aspects of climbing form, time trialing, speed endurance, and riding more aerodynamically.

Cadence recommendations vary depending on the current drill, but riders choosing to omit the drills should aim for a spin between 85-95rpm.
---
---
TrainerRoad - Mount Field

Sample Day 6
1:30:00
64.6TSS
Output Cycling: Endurance/Tempo 90 min

This workout is 90 minutes of non-stop aerobic conditioning at 55-80% FTP where the effort changes based on cadence.

Effectively a fixed-gear trainer ride with low to moderate effort levels that primarily utilize fat as the fuel source.
---
Primarily, the workout is about Increasing your aerobic fitness by growing your body's ability to utilize fat for energy and spare sugar stores.

Additionally, you can improve your pedal efficiency through high-rpm spinning and also focus on furthering your muscular control and joint integrity via low-rpm grinding.

Cadence recommendations vary at least +/- 20rpm from your self-selected cadence.

So for example, if you typically ride at 90rpm then your rpm range will be 70-110rpm - the greater your capabilities, the greater this rpm range.
---
---
TrainerRoad - Baxter

Sample Day 7
2:30:00
105.7TSS
Output Cycling: Endurance 1 x 150 min

This workout consists of nearly 2.5 hours of aerobic Endurance riding spent between 60-75% FTP.

Optional form drills include Form Sprints,
Endurance Spinning and Single-Leg Focus (SLF).

Sample Day 9
1:00:00
49.5TSS
Output Cycling: ILT, Form Sprints & Spin ups

This workout consists of all sorts of form work including Isolated Leg Training (ILT), Form Sprints & Cadence Spin-Ups.

After 3x3-minute ILT drills you'll face 10x30-second Form Sprints with 90 seconds of rest between each.


Then, you'll see another, shorter 3x2-minute round of ILT and finish with 2x6-minute Cadence Spin-Ups with 3 minutes of recovery between them.

---
Goals
Improvements in form are the name of the workout's game.

Not only will you have the chance to target improvements in speed endurance, but you'll practice keeping tension on the chain and more consistent power to the pedals during some single-leg drills.


Even the smallest improvements in pedal economy, i.e. how hard you work for each pedalstroke, are magnified hundreds, even thousands of times. So pay attention and make each drill matter - it will be worth it


During the ILT drills, strive to raise your cadence to 85+ rpm over time, but only spin as fast as you can control without 'knocking'.


Form sprints can be extremely quick but again, only as fast as you can control - NO bouncing.


Same goes for the spin-ups: fast, faster, all-out, but no bouncing, no joint pain.

Sample Day 10
0:30:00
22.6TSS
Output Cycling: Endurance 1 x 30 min

This workout is 30 minutes of aerobic Endurance riding spent somewhere between 65-75% FTP.
---
Goals:
Aerobic Endurance training is primarily about cultivating a strong, wide aerobic base that includes all of the physiological adaptations inherent in long, steady, low-intensity riding, e.g. improved fat metabolism, better oxygen delivery & glycogen conservation, lower HR at higher power outputs, improved efficiency, etc.

As time-constrained as most riding schedules are though, shorter Endurance rides done consistently can make up for some of the time restrictions faced by most riders.

Try to hold your spin within an 85-95rpm range & spend ample time adapting to & modifying your position on the bike while the workload is pretty manageable.
---
---
TrainerRoad - Volunteer

Dan Backhausen
|
1969

Output Cycling is a small coaching business dedicated to training all types of cyclists, from the "newbie" to the very experienced elite Cat. 1-rider. All clients (athletes) are assigned a personal coach who, in addition to the actual training, factors in an athlete’s work and personal life for long-term success. All in the efforts needed to achieving the athletes personal goals. We "micro-manage" on a daily routine and pride ourselves of having that "part of the family feeling". Join us.